Delphi Edge Chrome 3-Hole Deck Mounted Bath Filler Tap

Delphi Edge Chrome 3-Hole Deck Mounted Bath Filler Tap

Laid out across the tap ledge of the bath, this filler splits into a broad flat spout and two upright valve pillars, each capped with a wide blade lever. The spout is the part that catches the eye: a shallow rectangular blade that throws a wide, flat stream rather than a narrow jet, reaching 180mm out over the bath. Everything is chromed and squared off, with just enough radius on the corners to stop it feeling severe.

The set stands 135mm above the deck and needs three holes in the bath or its tap ledge.

Product Features

• Three-hole deck mounted bath filler, comprising a flat blade spout and two lever valves
• Broad rectangular spout reaching 180mm over the bath, standing 135mm above the deck
• Wide blade levers on square pillars, easy to nudge open with a wet hand
• Bright chrome finish that wipes clean and sits comfortably alongside white ceramic
• Quarter turn ceramic disc valves give a short, precise travel from off to full
• Hard ceramic discs replace rubber washers, so the valves stay drip free far longer
• Solid brass construction weighing 3.14kg, giving a hard-wearing and durable core
• Designed for 2 bar and above, so a combi or unvented cylinder is needed
• Runs at 22.6 litres per minute at 3 bar, filling a bath briskly
• Guarantee: 5 years, with 12 months on serviceable moving parts