Delphi Edge Brushed Brass Deck Mounted Bath Filler Tap

Delphi Edge Brushed Brass Deck Mounted Bath Filler Tap

Brass on the edge of a bath is a warmer proposition than chrome, and this filler makes the most of it. The broad flat spout blade catches the light along its whole length, and the two square pillars either side pick it up again at the levers. Brushed rather than polished, so the golden tone stays soft and fingerprints do not sit on it. The spout reaches 110mm in over the tub from 136mm above the deck.

Two tap holes are needed in the bath or its tap ledge.

Product Features

• Two-hole deck mounted bath filler with a flat blade spout between two square pillars
• Wide spout blade reaching 110mm over the bath, standing 136mm above the deck
• Blade levers on both pillars, one hot and one cold, on square deck flanges
• Warm brushed brass with a soft golden tone that suits a freestanding or panelled bath
• PVD coated for a durable brushed brass appearance that resists tarnishing and scratching
• Quarter turn ceramic disc valves that open fully in a short, precise movement
• Solid brass construction weighing 2.16kg, giving a hard-wearing and durable core
• Needs 1 bar, so a combi or unvented cylinder suits; pump a gravity system
• Delivers 32 litres per minute at 3 bar, filling a standard bath briskly
• WRAS approved, so it meets the UK water supply regulations
• Guarantee: 3 years, with 12 months on serviceable moving parts