Delphi Fathom Matt Black Bath Shower Mixer Tap with Kit
This is the Fathom bath filler with the shower side added: the same low twin-pillar body and cranked angular spout, a small faceted diverter knob sitting between the two handles, and a full kit to run from it. Turn the diverter and the water leaves the bath spout and goes up to a slim square handset on a flexible hose, which is what you actually want for rinsing hair, rinsing children, or rinsing the bath itself once everyone is out. The tap body is brass with an ABS handset, the handles are flat paddles on quarter turn ceramic discs, and the pillars sit at 180mm centres on 3/4 inch BSP inlets. The matt black finish is carried across the tap, hose and handset together, so the shower kit belongs to the tap rather than looking bolted on.
Product Features
- Deck mounted bath shower mixer supplied complete with a shower handset, flexible hose and holder
- Diverter control between the two handles switches the water between the bath spout and the handset
- Slim square handset with a recessed jet plate, sized to match the angular lines of the tap body
- Angled cranked spout on a low 120mm body, with a 113mm reach and 69mm from base plate to outlet
- 180mm tap hole centres - check this against the drillings in your bath before ordering
- Flat paddle handles on quarter turn ceramic disc valves for a short, positive action
- Brass tap body with an ABS handset, 2.20kg all in, finished in matt black
- 3/4 inch BSP inlet connections, the larger bath size, for a faster fill
- Delivers 25.9 litres per minute at 2.0 Bar and 32.4 litres per minute at 3.0 Bar
- Matching basin mixer, high rise tall basin mixer and bath filler available in the range
- Backed by a 5 year manufacturer guarantee (subject to terms)
Important Information
- Bath waste not supplied - several options are available separately, and the waste shown fitted in the photograph is not part of this product
