Delphi Nexus Chrome Dual Concealed Shower Set with Large Drencher Head and Slide Rail Kit
This is the full Nexus showering wall: a 300mm square drencher brought out over the centre of the enclosure on a 430mm mitred arm, with a slim square rail below it for everyday use. The valve plate keeps its sharp corners and chunky block handles, so the geometry runs from the controls right up to the head.
The concealed thermostatic valve feeds both accessories from two controls, one for temperature and one that turns the shower on and switches between outlets. Valve, 300mm head, mitred arm and 685mm rail kit are supplied together in chrome for one price.
Bundle Contents
- 1 x Delphi Nexus Chrome 2-Outlet Dual Concealed Shower Valve
- 1 x Delphi Square Chrome Fixed Shower Head 300mm x 300mm
- 1 x Delphi Mitred Chrome Shower Arm 430mm
- 1 x Delphi Square Pencil Chrome Slider Rail Shower Kit (inc Wall Outlet Elbow)
Shower Valve Features
- Two-handle shower valve, including the concealing plate and valve body in one package
- Two outlets with an integrated diverter, feeding the fixed head or the square rail kit
- Two controls: one sets the temperature, the other turns the shower on and switches between outlets
- Thermostatic cartridge holds your set temperature to within 2 degrees C
- TMV2 approved, so the flow shuts off if the cold supply fails
- WRAS approved for connection to the mains water supply
- Quarter turn ceramic disc cartridge, highly resistant to limescale
- 215mm x 120mm plate, fitted portrait or landscape
- 15mm inlets, working from a minimum of 0.5 bar
- Chrome finish, matched across every piece in the bundle
Fixed Shower Head and Arm Features
- Generous 300mm x 300mm square spray face for full width rainfall coverage
- Slim 56mm overall height, with a thin chamfered edge that disguises the depth
- Stainless steel, which will not rust or tarnish in a shower enclosure
- Nozzles set in a regular grid, giving an even spread rather than a hot centre
- Single function spray on a 1/2 inch BSP swivel connector
- Matching mitred arm projecting 430mm from the finished wall on a 60mm circular flange
Slide Rail Kit Features
- 685mm rail, 129mm wide and projecting just 65mm from the wall
- Handset slides and locks at any height along the bar
- Single function square handset with a flat, easy clean spray face
- 1500mm flexible shower hose
- Wall outlet elbow included, connecting the kit straight to the concealed valve
- Brass and ABS construction
- 5 year guarantee across the bundle against faulty workmanship and materials, with 12 months on serviceable and moving parts
Important Information
- This is a two-outlet shower valve designed for two accessories only (both are included).
