Delphi Sedona Matt Black Pillar Mounted Bath Filler Tap

Delphi Sedona Matt Black Pillar Mounted Bath Filler Tap

Standing 311mm off the bath deck with a 183mm reach, this matt black filler is a tall pair of pillars rather than a low-slung deck tap. The arc carries water well into the bath and leaves room to get a bucket or a bath seat underneath the outlet. Its two crosshead handles sit on their own pillars at 180mm centres, matching the standard drilling on most two-hole baths, and matt black against a white bath is a hard contrast that is usually the reason people pick it over chrome.

Chrome and brushed brass cover the rest of the Sedona bath range.

Product Features

• Two-hole bath filler for a bath deck drilled at 180mm centres
• Tall arched spout reaching 311mm high and 183mm out over the bath
• Crosshead handles on separate pillars, one hot and one cold
• Matt black finish across pillars, handles and spout for a strong contrast
• 3/4 BSP inlets, the larger bore that helps a bath fill quickly
• Quarter turn ceramic discs open fully in one movement, with no washers inside
• Solid brass body weighing 3kg, built for years of hot and cold cycling
• Needs only 0.2 bar, so gravity-fed tanks and combis both run it
• Moves 29 litres per minute at 0.5 bar and 48 at 2 bar
• WRAS approved under number 2204060, meeting UK water supply regulations
• Guarantee: 3 years, with 12 months on serviceable moving parts