The Smiths Space Maker SST8 Floor Mounted Hydronic Fan Convector is perfect for places where space is particularly limited. Because the unit fits flush to the floor, no wall space is taken up and effective heat can be distributed at a low level. The Smiths Space Maker SST8 Floor Mounted Hydronic Fan Convector is perfect for areas such as halls or lobbies where circulation of air is important.
HOW DOES HYDRONIC FAN CONVECTION WORK?
Fan convectors require connection to a wet central heating system and an electrical connection to run the fan. Hot water passes through the heat exchanger and heat is transfered to the aluminium fins. Cooler air is drawn in and heated before being expelled back into the room. This technology uses, on average, less than 2p of electricity per day. It means that a more even temperature gets distributed and the room will be heated much faster than a traditional panel radiator.
Smiths Space Maker HPSM12001 Floor Mounted Hydronic Fan Convector Features:
- Installs between floor joists or purpose-made trenches in the floor
- Finished in an anodised aluminium grille with removable centre
- Unit must be earthed
- Suitable for two-pipe central heating systems only
- Rocker switch: on/off/boost fitted below grille
- Supplied with a 5 year guarantee from the manufacturer
Smiths Space Maker HPSM12001 Floor Mounted Hydronic Fan Convector specification:
|Fan Convectors Type
|Fan Convector Width
|Fan Convector Depth
|Normal Heat Output at 50C (kW)
|Normal Heat Output at 50C (BTU)
|Boost Heat Output at 50C (kW)
|Boost Heat Output at 50C (BTU)
|Approx Room Size (m3)
|Manufacturer Part Number