Verona Cubo Chrome Pillar Mounted Bath Filler Tap
If your bath has the standard pair of tap holes and you want brassware that looks deliberate rather than default, the Cubo bath filler is a straightforward upgrade. Two square pillars carry a broad, angular spout between them, with a flat chrome lever on each side giving you independent hot and cold control - a quick, quarter-turn nudge of either is all it takes to fine-tune the mix as the bath fills. The valves behind those levers are ceramic disc rather than washer-based, so the action stays light and the shut-off stays drip-free instead of slowly wearing loose. At 145mm tall it sits low and solid on the bath deck, matching the geometry of the Cubo basin mixers exactly; if you would rather have a handset for rinsing, the same tap is available as a bath shower mixer with the kit included.
Product Features
- Deck-mounted bath filler spanning two standard tap holes on the bath rim
- Square-section pillars, spout and lever handles carry the Cubo geometry across the bathroom
- Twin levers give independent hot and cold control for precise temperature mixing
- Quarter-turn ceramic disc valves - light, exact operation and a positive, drip-free shut-off
- Solid brass construction with a polished chrome finish
- 145mm tall with a 78mm base-to-spout height, keeping a low profile on the bath deck
- Standard UK 3/4 inch BSP connections
- Needs 1.0 bar minimum water pressure - suits combi boilers and pressurised systems, not low-pressure gravity-fed tanks
- Matching Cubo basin mixers and a bath shower mixer version with handset are available
