Verona Rivenza Chrome Bath Filler Tap
The quickest way to judge a bath filler is by the wait it leaves you with, and the Rivenza deck-mounted filler keeps it short - flowing at 10.7 litres per minute at 1.0 bar and up to 19.3 litres per minute at 3.0 bar. Twin round pillars with slim quarter-turn levers give independent control of hot and cold, meeting in a low, gently curved central spout, finished in polished chrome for a bright, classic look. It mounts through two standard tap holes on the bath rim and keeps a low 149mm profile that suits a modern bathroom. An aerator built into the spout softens and steadies the stream as the bath fills.
Product Features
- Two-tap-hole deck-mounted bath filler with independent hot and cold lever controls
- Round-bodied pillar design with slim levers and a curved central spout
- Polished chrome finish - bright, classic and easy to match with existing fittings
- Quarter-turn ceramic disc valves - smooth, precise control with no rubber washers to wear, so no drips down the line
- Built-in aerator in the spout - a softer, steadier stream with less splash
- Low 149mm profile with a 118.9mm spout reach over the bath rim
- Fills at 10.7 litres per minute at 1.0 bar, rising to 19.3 litres per minute at 3.0 bar - suitable for all plumbing systems (minimum 1.0 bar), with balanced hot and cold supplies preferred at no more than a 5:1 pressure differential
- Brass body with zinc-alloy lever handles and 3/4 inch valves - the standard UK bath tap connection
- WRAS approved and manufactured to BS5412 and BS EN200 standards - meets UK water supply regulations
- Lifetime guarantee from the manufacturer, subject to a 5-year clause on certain parts - see the guarantee policy for details
Important Information
- Bath waste not included - wastes are available separately
