AKW Smartcare Plus White Electric Shower with Kit with M11 Pump - 10.5kw

Product Features

• Optional Bluetooth smart wireless remote control available separately (see the You May Need section)
• Image shown for illustration purposes only
• Supplied with matched shower PCB and pump interface box
• Easy-to-operate push-button controls for power, temperature and flow
• Closely grouped controls for convenient operation
• Raised tactile symbols marked +/−, Temp and Flow
• Audible and LED-illuminated temperature and flow indicators
• Matt, anti-glare finish
• Rounded surfaces and edges designed with user safety in mind
• BEAB Care certified and RNIB tried and tested
• Care kit includes a 2m hose, 150kg load-bearing rail and adjustable multi-mode shower handset
• Thermostatic control with phased start-up and automatic shutdown
• Compatible with the AKW shower app for iPhone and Android
• Quiet operation with minimal disturbing noise
• Compact design with the pump and controller housed in a single unit
• Delivers 11 litres per minute under real-life scenario testing
• 15mm inlet and 22mm outlet connectors
• Non-handed design suitable for left- or right-hand installation
• IP45 rating, making it suitable for installation within the showering area
• Pump head features four valves to improve debris clearance
• Rotatable pump head allows water flow in either direction
• Maximum inlet head: 0.5m (19in)
• Maximum combined head and lift: 1.5m (59in)
• Maximum outlet head: 1.0m (39in)
• Power supply: 230V AC, 50Hz, 73W
• Internal T5A fuse
• Maximum duty cycle of 30 minutes at 50% duty
• Flow meter input
• The only shower waste pump range to be Kitemarked
• Complies with BS EN 61558-1, BS EN 61558-2-6, BS EN 60335-1, BS EN 60335-2-41 and BS EN 60529
• Complies with EMC Directive 89/336/EEC and Low Voltage Directive 73/23/EEC
• WRAS-approved product
• Designed for straightforward installation
• External wireless communication device compatible with AKW SmartCare Plus and SmartCare Lever electric showers
• No cables are needed between the pump and shower, simplifying installation where a pump is required because gravity drainage from the shower waste is not possible
• Compatible with all AKW DigiPump models: M11, M17 and M20
• Supplied with a matched PCB to connect the wireless module to the shower unit
•  Once paired, the wireless module remains connected even when both the shower and pump are isolated from the mains supply
• The module continuously monitors the connection between the pump and shower
• If the connection is lost, the shower automatically stops the water flow and the on/off ring indicator, along with other applicable indicators, flashes
• Supplied with a 5 year guarantee from the manufacturer