Delphi Port Matt Black Bath Filler Tap
Two round pillars, two blade levers and a flat bridge spout that steps down between them: the Port bath filler takes the language of the basin mixer and spreads it into the wider, lower proportions a bath rim needs. It stands only 119mm tall on 180mm hole centres, the standard two hole drilling on UK baths, so it fits without crowding the rim or fouling a shower screen. Both handles are quarter turn on ceramic discs, which means a short positive movement from off to full instead of winding a tap round several times. With 3/4 inch tails and 20.8 litres per minute at 1.0 Bar it fills at a sensible rate rather than trickling. Matt black is flat and non-reflective, contrasting hard against a white bath and sitting well with dark grout or concrete-effect tiling.
Product Features
- Deck mounted bath filler for a two tap hole bath, with a pair of quarter turn lever handles
- Twin round pillars joined by a flat, stepped blade spout - the same round-against-square styling as the Port basin mixers
- 180mm hole centres and a low 119mm height suit standard UK bath drillings and leave room alongside a screen, with a 113mm spout reach
- Matt black finish over the brass body - a flat, non-reflective surface that draws a hard dark line against a white bath
- Quarter turn ceramic disc valves - a short, positive movement from off to full, with no washers to wear out
- Solid brass body for a solid feel in the hand and long service life
- Needs 1.0 Bar minimum - one for mains pressure, a combi boiler or a pumped gravity system - and delivers 20.8 litres per minute at 1.0 Bar, so a bath fills without a long wait
- Standard 3/4 inch BSP tails for connection to UK bath pipework
- Matching basin mixer, tall basin mixer and bath shower mixer available across the Port range in all three finishes
- Backed by a 5 year manufacturer guarantee (subject to terms)
Important Information
- Bath waste not supplied - several options are available separately
