Maxxus Hydromat Wet Room Former Kit 900mm x 900mm 10sqm Membrane

When installed correctly by a competent person and used for normal wetroom applications this tanking system has a life-of-tiling guarantee, No guarantee is offered where this is not the case.

Product Features

• Should be applied at minium one meter up the walls and one meter into the room
• Areas outside that are exposed frequently to water also require tanking
• The aim is to create one continuous tanking sheet down to the drain
• Jointing tapes and corners are self adhesive on both sides with removable films
• Trim-able on all for sides by 50mm
• The sheet membrane is self adhesive with a fleece top
• The sheet membrane provides maximum key for tile adhesive
• The Butyl Sealant does not cure solid, it will remain permanently plastic
• 10m2 Hydromat Membrane
• 20m Hydromat Joint Tape
• 2 x Self Adhesive Internal Corners
• 1 Litre Primer
• Butyl Sealant and Roller
• Creates a level access floor with no step
• Built-in gradient falls
• 47 litres per minute drain flow
• For more and detailed information please check Fitting Instructions document