The Smiths Ecovector HL 4000 High Level Hydronic Fan Convector offers safety due to it's low surface temperature, and energy efficiency thanks to fan convector technology.Suitable for use with traditional boiler-fed systems as well as renewable technology such as heat pumps, the Smiths Ecovector HL 4000 High Level Hydronic Fan Convector is quiet in operation, as well as being fast and responsive to change.Fitted unobtrusively above head height, the Ecovector High Level range utilises dead wall space for ease of siting.
Product Features
- No top or side clearance required
- Unit must be earthed
- Suitable for two-pipe central heating systems
- Maximum installation height 2.1m (6'11") to underside
- Check water is hot enough to activate the low temperature cut-out thermostat
- The inclusion of an automatic air vent at the highest point is recommended to avoid possible air locks
- Two rocker switches: normal/off/boost, heating/fan-only
- Low temperature cut out thermostat, set to energise fan at approximately 35 degree C
- Compatible with most types of wet central heating systems
- They work particularly well in shops and libraries, where lower wall space is limited
- Functioning equally efficiently with conventional boilers, biomass technology or ground or air source heat pumps
- Supplied with a 5 year guarantee from the manufacturer
