Verona Rivenza Brushed Brass Bath Filler Tap
The quickest way to judge a bath filler is by the wait it leaves you with, and the Rivenza deck-mounted filler keeps it short - flowing at 10.7 litres per minute at 1.0 bar and up to 19.3 litres per minute at 3.0 bar. Twin round pillars with slim quarter-turn levers give independent control of hot and cold, meeting in a low, gently curved central spout, finished in warm brushed brass for a soft, golden glow. It mounts through two standard tap holes on the bath rim and keeps a low 149mm profile that suits a modern bathroom.
Product Features
- Two-tap-hole deck-mounted bath filler with independent hot and cold lever controls
- Round-bodied pillar design with slim levers and a curved central spout
- Brushed brass finish - a warm accent that flatters white ceramics and deeper colour schemes
- Quarter-turn ceramic disc valves - smooth, precise control with no rubber washers to wear, so no drips down the line
- Low 149mm profile with a 118.9mm spout reach over the bath rim
- Fills at 10.7 litres per minute at 1.0 bar, rising to 19.3 litres per minute at 3.0 bar
- Requires a minimum of 1.0 bar water pressure - best suited to combi boilers and pressurised (unvented) systems; gravity-fed systems will usually need a pump
- Solid brass body construction for lasting everyday use
- Standard UK 1/2 inch BSP inlet connections
- Part of the Verona Rivenza collection - matching basin mixers and a bath shower mixer version are available in five finishes
