Verona Rivenza Chrome Bath Shower Mixer Tap (inc Kit)

Verona Rivenza Chrome Bath Shower Mixer Tap with Shower Kit

One pair of tap holes, two ways to use them: the Rivenza bath shower mixer fills the bath through its curved central spout, then diverts the water to the supplied handset for rinsing hair, washing the dog or sluicing the tub clean. Twin round pillars with slim levers give independent quarter-turn control of hot and cold, finished in polished chrome for a bright, classic look. The pencil-slim handset carries the same round-bodied lines as the tap itself.

Product Features

• Two-tap-hole bath shower mixer supplied with a shower kit - divert water between the bath spout and the handset as needed
• Round-bodied pillar design with slim lever handles and a pencil-slim matching handset
• Polished chrome finish - bright, classic and easy to match with existing fittings
• Quarter-turn ceramic disc valves - smooth, precise control with no rubber washers to wear, so no drips down the line
• Low 149mm profile with a 118.9mm spout reach over the bath rim
• Fills at 9.5 litres per minute at 1.0 bar, rising to 17.2 litres per minute at 3.0 bar
• Requires a minimum of 1.0 bar water pressure - best suited to combi boilers and pressurised (unvented) systems; gravity-fed systems will usually need a pump
• Brass and ABS construction
• Standard UK 1/2 inch BSP inlet connections
• Part of the Verona Rivenza collection - matching basin mixers and a spout-only bath filler are available in five finishes