Delphi Axiom Lever Brushed Brass Wall Mounted Basin/Bath Filler Tap

Delphi Axiom Lever Brushed Brass Wall Mounted Basin/Bath Filler Tap

Brushed brass suits a wall mounted spout better than most finishes, because the plate and the tube are large flat surfaces where a polished finish would show every splash. This one projects 213mm from its backplate with a downturned tip, and the pin lever drops below the round body and turns through a quarter circle. It works over a countertop bowl, a wall-hung basin or a bath with no tap ledge.

The waste is not part of the set and is chosen to suit your basin.

Product Features

• Wall mounted basin and bath filler, projecting 213mm from the wall face
• Tubular spout with a downturned tip, mounted on a plate 100mm high
• Warm brushed brass across the backplate, body, lever and spout
• PVD coated for a durable brushed brass appearance that resists tarnishing and scratching
• Pin lever below the body turns to set both flow and temperature
• Solid brass build weighing 2.36kg for a long working life
• Ceramic disc cartridge for precise control and long-term drip resistance
• Works from 0.1 bar at a basin; allow 0.5 bar or more for bath filling
• Delivers 8 litres per minute at 0.5 bar, rising to 20.5 at 3 bar
• Guarantee: 3 years, with 12 months on serviceable moving parts

Important Information

• A waste is not included with this tap and must be ordered separately.