Delphi Belgravia Brushed Brass Bath Filler Tap
Fitted to the two tap holes of a bath deck at 180mm centres, this Belgravia filler is built around one job: getting a bath full while it is still hot. It moves 30.00 litres per minute at 0.5 Bar and 40.00 litres per minute at 1.0 Bar through 3/4 inch BSP inlets - the larger bath-standard connection - so the water arrives at a proper rate rather than trickling. The brushed brass finish gives the casting a warm, matte weight that suits a traditional bathroom better than a mirror shine. The 150mm spout reach carries the flow clear of the bath rim, and the tapered legs and crosshead handles keep the whole thing in period. Hot and cold are worked separately on full-turn screw-down valves, with white ceramic indices marking which is which.
Product Features
- Traditional two tap hole bath filler for deck mounted baths at 180mm hole centres
- Twin crosshead handles blend hot and cold through a single cast spout
- Brushed brass finish across the legs, body and handles, with white ceramic hot and cold indices
- Screw-down compression valves with full-turn operation and replaceable washers
- 100mm high with a 150mm spout reach to clear the roll of the bath rim
- Operates from 0.1 Bar - suitable for gravity-fed tanks as well as combi and pressurised systems - and fills fast at 30.00 litres per minute at 0.5 Bar
- 3/4 inch BSP inlet connections, the standard size for bath tap tails
- Solid brass construction throughout for long service life
- Also available in chrome, and matched by the Belgravia bath shower mixers if you want a handset as well
- Backed by a 5-year manufacturer guarantee (subject to terms)
Important Information
- Bath waste and overflow are not supplied - several options are available separately, and the waste plug shown in the product photograph is not included
